Proceed Logo

Stone block rendered with Proceed Sand Textures

 

New Sand Textures


 
Proceed Sand Textures are semi-opaque, 100% acrylic waterborne texture coatings that require minimal surface preparation. Like all Proceed textures, they are formulated to contain less than 50 g/l of VOC's and, as such, meets the criteria for LEED Credit 4.2 (Low Emitting Materials - Paints and Coatings). 
 
Sand Textures are formulated with coarse aggregates of uniform size and impart the look of architectural surfaces cut from stone, traditional stucco plasters or sand washes. They produce coarse, but relatively non-absorbent surfaces that may be easily overglazed. 
 
Sand Textures contain no crushable aggregates and therefore will not change texture as they are worked. They may be troweled to a uniform surface or stippled for maximum coarseness. Installed finishes are expected to exhibit some variations in lightness/darkness as the result of being hand tooled. The degree of surface smoothness, finish design, and application method and technique will also influence the uniformity of finish appearance. 
 
Sand Textures may be tinted with PROCEED® Pigment Dispersions, or PROCEED® Slow-Drying Fluid Acrylic paints if a weaker tint is desired. They are also compatible with most universal colorants. Rough Sand Texture contains no white pigment, making it possible to tint light to deep colors from a single base. Extra Rough Sand Texture contains white pigment which limits the tint range somewhat. 
 
Sand Textures are part of a family of compatible Proceed products that can be used alone or blended to achieve a wide range of surface appearance. 
 
 
TECHNICAL DATA:  
Weight Solids  
000D161 Rough Sand Texture: 66.0 ± 2% 
000D162 Extra Rough Sand Texture: 76.0 ± 2% 
 
Density  
000D161 Rough Sand Texture: 9.6 lbs. / gallon 
000D162 Extra Rough Sand Texture: 14.5 lbs. / gallon 
 
Flash Point >212 ° F 
 
VOC <50 grams / liter 
 
Spread Rate 50-150 sq. ft gallon  
 
Clean-Up Clean up with soap and water 
 
Recoat time Let dry 12 - 24 hours before recoating  
 
Full dry 3 to 4 weeks
 
 

A CONCISE, BUT COMPLETE, "TOOL KIT" OF HIGH-PERFORMANCE PAINTS, GLAZES, PIGMENT DISPERSIONS, TEXTURES, AND ANCILLARY PRODUCTS

Home :: Proceed Story :: Toolkit Design :: Products :: Where to Learn :: Where to Buy :: Community :: Contact Us
 
Proceed ® is a Registered Trademark of Golden Artist Colors, Inc.
© Golden Artist Colors, Inc.
Online Privacy Policy  
 
 
Proceed • Proceed System • Slow drying • Open time • Rough Irregular • Rough Regular • Smooth Absorbent • Smooth Translucent
Transparent Texture • Light Bodied Texture • Metallic Texture • Metallic Medium • Metallic Paint • Metallic Glaze
Clear Topcoats • Cracking Size • Clearcoats • Pigment Dispersions • Slow Drying Acrylics • Glass beads • Glass Bead Texture
Acrylic paints • Acrylic textures • Waterborne • Low VOC • Pigment • Faux • Faux painting • Decorative painting
Decorative paints • Decorate • Decorating • Remodel • Plaster • Faux Finish • Finishing • Finishes • Painting • Design Trends
Color • Color trends • Custom wall finishes • Classes • School • Venetian Plaster  • Surfaces  • Catalog • Old World finish
Contemporary finish • Stone  • Stucco • Trompe L'oeil • Mural • Muraling • Color wash • Wood graining • Marbleizing
Marbeling • Glazing • Sponge • Tint